• Technical Data
  • Hardware
  • Software
  • Manual

FSCUT2000E

FSCUT2000E medium power laser cutting system is for 1000-4000W power laser cutting scenarios. It is easy to install and debug with excellent performance and complete solution.

Technical Data

Model
FSCUT2000E
Control card
BMC228A
I/O terminal board
BCL4566E
Motor control signal
EtherCAT
Common Output
24 channels
Max load of a single channel: DC 24V/700mA
Software
CypCutE
Interface
PCIE bus, X4 and up
Power Supply
24V DC/2A
Work Environment
Temperature: 0-60℃
Humidity: 10%-90% RH(no condensation)
Dedicated Output
2 DA: 0~10V,12bit, 50mA
2 PWM: 5V/24V, 5KHz (0.3%)
Common Input
27 channels:
IN1-IN24,active low,0~15V
IN25-IN27,active high,24~8V

Benefits

Technique
Frame Border Contour: Frame profiled plate
One-Path FlyCut: Supported for all figures to improve efficiency
Circle Center: Auto center on circular plate and start cutting
Pallet Changer: Unloading while cutting, keep safe and efficient
Control
Path accuracy 0.01mm, positioning accuracy 0.001 mm, repetitive positioning accuracy 0.002 mm.
Unlimited cutting/travel speed
Maximum acceleration 2G

Application

Applicable to 1000W ~ 4000W medium power fiber laser cutting machine, widely used in fabricating industries of metal workpiece, kitchen utensils, lamps, cabinets and more.

FSCUT2000E
Components
BCL4566E BCL4566E terminal board
BCL4566E

Number:1

WKB Wireless hand-held remote
WKB

Number:1

BMC228B master card bmc228a
BMC228B

Number:1

BCL-AMP Preamplifier
BCL-AMP

Number:1

Accessories
SPC-140/SPC-180/140B/180B RF cable
SPC-140/SPC-180/140B/180B

Number:2

HC-15 4-pin cable
HC-15

Number:1

LAN-3X/LAN-0.3X/1X/7X/17X Network cable
LAN-3X/LAN-0.3X/1X/7X/17X

Number:5

CypNest CypNest
CypNest is a nesting software designed for CypCut/HypCut sheet laser cutting system. It integrates advanced functions of drawing modification, quick nesting, toolpath generation, analysis report and more to meet your production needs.
CypCutE CypCutE
Friendess CypCutE 2D cutting software is for medium power EtherCAT cutting system. CypCutE is easy to use, rich in functions, stable and reliable. It has advanced functions such as "Smooth MicroJoint", "Fast Cutting" and "Circle Center" to meet various processing needs.
6.4.2330.8
×

Welcome to contact us by email

版权所有©博鱼体育(中国)股份有限公司 CopyRight©Shanghai BOCHU Electronic Technology Co., Ltd.

Shanghai BOCHU Electronic Technology Co., Ltd. reserves the right to modify the software version and description of product models on the website without prior notice

沪ICP备14033040号-1

版权所有©博鱼体育(中国)股份有限公司

CopyRight©Shanghai BOCHU Electronic Technology Co., Ltd.

Follow us Disclaimer
请使用电脑浏览器访问